Typography ToolsBrowser-based calculationInstant output

Font Size & Print Point Calculator (PT, PX, MM, Inches)

Print designers measure type in PostScript points (where 72 points = 1 physical inch), packaging and signage regulations often specify minimum letter heights in millimeters (mm), and digital interfaces use CSS pixels (where 96 px = 1 reference inch). Convert seamlessly between pt, px, mm, inches, picas, and rem.

Font Size & Source Unit

Convert between PostScript points (pt), CSS pixels (px), millimeters (mm), inches, and picas.

pt
Input Unit
Converted Typography Dimensions
12 pt / 16 px

4.23 mm em-square height · Est. Cap Height (~70%): 2.96 mm

PostScript Points (pt)
12 pt
CSS Reference Pixels (px)
16 px
Millimeters (Em Height)
4.23 mm
Estimated Cap Height
2.96 mm
Inches (in)
0.1667 in
Picas (pc) / REM
1 pc / 1 rem
Technical & Prepress Specification Note
Browser pixels (CSS reference pixels at 96 PPI) and physical print units (72 points per inch) are context-dependent. Furthermore, a typeface’s nominal point size measures its em-square rather than the physical cap-height or x-height of specific glyphs, so treat conversions as typographic references and verify regulatory packaging text directly on outlines.

PostScript Point Conversion Formulas

1 inch = 72 pt = 6 picas = 25.4 mm = 96 CSS px | 1 pt = 0.3528 mm = 1.3333 px

In modern desktop publishing (DTP), 1 PostScript point is strictly 1/72 of an international inch (0.352778 mm). In W3C CSS standards, 1 reference pixel is 1/96 of an inch, meaning 12 pt = 16 px.

How to Use This Calculator

  1. Enter your font size value and select the source unit (Points pt, Pixels px, Millimeters mm, Inches in, or Picas pc).
  2. Read the converted measurements across all typographic and physical units immediately.
  3. Browse the reference table of standard print typography sizes from 6 pt legal text to 72 pt display headlines.

Worked Example: Converting 10 pt Book Body Copy to Millimeters and CSS Pixels

You want to know the physical em-square height in millimeters and CSS pixel equivalent of 10 pt type.

1. Millimeters = (10 ÷ 72) × 25.4 = 3.53 mm em-square height
2. CSS Pixels = 10 × (96 ÷ 72) = 13.33 px
Final Output: 10 pt = 3.53 mm = 13.33 px (0.833 picas)

When Designers Use the Font Size / Print Point Calculator

Used when translating web design systems (px/rem) into print brochures (pt), or when checking packaging regulatory requirements that mandate minimum cap-height or font size in millimeters.

Practical Prepress & Design Advice

  • • Remember that a font’s nominal point size (e.g., 12 pt = 4.23 mm) measures the invisible vertical em-square body of the typeface, not the visible height of capital letters ("cap height"). Capital letters typically measure about 68% to 72% of the point size!
  • • If a packaging regulation requires a "1.2 mm minimum x-height," choose a font size around 7 pt to 8 pt and measure a lowercase "x" directly in Illustrator/InDesign.

Common Mistakes to Avoid

  • • Using 16 pt for body copy in a printed brochure because "16 px is standard on the web"—on paper, 16 pt looks like a giant children’s book! Standard print body copy is 8.5 pt to 10.5 pt.

Font Size / Print Point Calculator – Frequently Asked Questions

For magazines, brochures, and books, body text is typically set between 8.5 pt and 11 pt (with 9.5 pt to 10.5 pt being the most common sweet spot). For business cards, 7.5 pt to 9 pt is standard.

12 points equals 4.23 mm (12 ÷ 72 × 25.4 = 4.2333 mm) for the full em-square height. The visible capital letter height (cap height) of a 12 pt font is typically around 3.0 mm.

At the standard 96 PPI CSS reference density, multiply points by 1.3333 (4 ÷ 3) to get pixels—for example, 12 pt = 16 px, and 18 pt = 24 px. If rasterizing inside a 300 DPI print canvas, 12 pt equals (12 ÷ 72) × 300 = 50 device pixels.

Related Print & Design Calculators

View all 40 tools →
Typography

Line Height Calculator

Calculate line height (leading) in points, pixels, and millimeters from font size and ratio presets (1.0 to 2.0).

Paper & Layout

Margin Calculator

Calculate usable live design area and column widths from page size and Top, Bottom, Left, Right margins.

Paper & Layout

Business Card Size Calculator

Calculate US/Canada, UK/European, DIN, Square, or Custom business card dimensions with bleed, safe zone, and pixels.

Connected Print & Prepress Entities for Font Size / Print Point Calculator

Explore related mathematical concepts, ISO standards, and prepress calculators.

Typography Tools Hub →

Desktop publishing PostScript point equal to exactly 1/72 of an international inch (0.3528 mm).

Top, bottom, outside, and binding gutter margins surrounding the live typography column.

Vertical distance between consecutive baselines of type, measured in points, pixels, or unitless ratios.

Regional card standards including North American 3.5 × 2 in and common European 85 × 55 mm.