Paper & Print Layout ToolsBrowser-based calculationInstant output

Print Bleed Calculator for Prepress & Layout Design

In commercial printing, "bleed" is the extra background artwork that extends past the final trim line on all four edges of the page. When stacks of paper are cut on a mechanical guillotine, microscopic shifts of 0.5 to 1.5 mm are normal; adding bleed guarantees that background colors and photos reach the edge of the paper without leaving an unprinted white hairline.

Finished Trim Size & Bleed per Side

All four edges (Top, Bottom, Left, Right) are accounted for automatically.

Measurement Unit
mm
mm
mm

Adds/subtracts 6 mm total horizontally & vertically

DPI
Full Document Size with Bleed
106 × 206mm

1252 × 2433 pixels at 300 DPI

Pixels at 300 DPI
1252 × 2433 px
Total Horizontal Delta
+6 mm
Total Vertical Delta
+6 mm
SAFE ZONE
Prepress Page Box Legend

Bleed Box (Outer Dashed): Extend background colors and photos all the way to this edge.

Trim Line (Solid Center): Target guillotine blade cut line for the finished piece.

Safe Area (Inner Dashed): Keep all headlines, body copy, logos, and QR codes strictly inside this boundary.

Technical & Prepress Specification Note
Bleed specifications vary by printer, binding method, and product type. While 3 mm (metric) and 0.125 in (US) are standard for commercial sheetfed printing, die-cut packaging, hardcover book wraps (often 15–20 mm), and large-format sewn banners require custom bleed allowances.

Full Document Size with Bleed Formula

Document Width = Finished Width + (2 × Bleed) | Document Height = Finished Height + (2 × Bleed)

Because bleed is added to both the left and right edges (horizontal) and both the top and bottom edges (vertical), you multiply the per-side bleed by 2 before adding it to the finished trim dimensions.

How to Use This Calculator

  1. Enter your finished (trimmed) width and height, and choose your unit (mm, inches, or cm).
  2. Enter the bleed per side required by your printer (commonly 3 mm in metric regions or 0.125 inches in North America).
  3. View the full document width and height, pixel dimensions at your target DPI, and the visual bleed/trim diagram.

Worked Example: Adding 3 mm Bleed to a 100 × 200 mm Rack Card

Your finished rack card measures 100 × 200 mm and your printer specifies a 3 mm bleed on all sides.

1. Document Width = 100 mm + (3 mm × 2) = 106 mm
2. Document Height = 200 mm + (3 mm × 2) = 206 mm
Final Output: 106 × 206 mm total document size (1252 × 2433 pixels at 300 DPI)

When Designers Use the Bleed Calculator

Used whenever setting up raster canvases in Photoshop/Procreate (which do not have separate bleed settings like InDesign) or verifying exported press PDF page box dimensions.

Practical Prepress & Design Advice

  • • In Adobe InDesign or Illustrator, always enter your finished trim size as the document Width/Height and put the bleed value in the dedicated "Bleed" fields—never bake bleed into the main artboard size if exporting with crop marks.
  • • In Photoshop or Procreate, there is no separate bleed field, so you must set your canvas to the full Document Size (Finished Size + 2 × Bleed) and place ruler guides at the trim lines.

Common Mistakes to Avoid

  • • Adding the bleed value only once (e.g., making a 100 × 200 mm card 103 × 203 mm instead of 106 × 206 mm).
  • • Placing an empty white border around the artwork inside the bleed area instead of extending the background photograph or color all the way to the outer bleed edge.

Bleed Calculator – Frequently Asked Questions

For standard commercial print (business cards, flyers, brochures, magazines), 3 mm per side is the standard in metric countries, and 0.125 inches (1/8 inch) per side is standard in the US and Canada.

A 3 mm bleed is required on all four outer edges: 3 mm on the left + 3 mm on the right adds 6 mm to the total width, and 3 mm on the top + 3 mm on the bottom adds 6 mm to the total height.

If no ink, border, or image touches the outer edge of the sheet, bleed is not strictly functional—however, many automated online print portals still require the PDF MediaBox/BleedBox to include the 3 mm or 0.125" bleed dimension to pass automated preflight.

Related Print & Design Calculators

View all 40 tools →
Paper & Layout

Trim Size Calculator

Calculate final trimmed dimensions from a full-bleed document size and bleed allowance.

Paper & Layout

Safe Area Calculator

Calculate the inner safe zone for text and logos based on finished trim size and safe margin.

Paper & Layout

A4 Size Calculator

Complete A4 dimensions (210 × 297 mm / 8.27 × 11.69 in) and pixel sizes across 72, 96, 150, 300, and 600 DPI.

Paper & Layout

Business Card Size Calculator

Calculate US/Canada, UK/European, DIN, Square, or Custom business card dimensions with bleed, safe zone, and pixels.

Paper & Layout

Flyer Size Calculator

Calculate flyer dimensions and bleed for A4, A5, A6, DL, US Letter, Half Letter, and Custom handouts.

Connected Print & Prepress Entities for Bleed Calculator

Explore related mathematical concepts, ISO standards, and prepress calculators.

Paper & Print Layout Tools Hub →

Artwork extension beyond the trim line (typically 3 mm or 0.125 in) to prevent white edges after cutting.

Standard international letterhead and document sheet measuring 210 × 297 mm (8.27 × 11.69 in).

Final cut width and height of a printed sheet after guillotine trimming removes the bleed margin.

Inner safety boundary inside the trim edge that protects text, logos, and QR codes from mechanical cutting drift.

Regional card standards including North American 3.5 × 2 in and common European 85 × 55 mm.

International paper size standard based on the 1:√2 aspect ratio and a 1 m² A0 reference sheet.