Flyer Size Calculator
Calculate flyer dimensions and bleed for A4, A5, A6, DL, US Letter, Half Letter, and Custom handouts.
The #1 prepress mistake on a tri-fold (letter-fold) brochure is dividing the sheet into three identical thirds. Because the right-hand panel folds inward inside the other two panels, making all three panels equal causes the paper to telescope and buckle at the crease. This calculator computes exact panel widths and fold guide positions for Bi-fold, Tri-fold (with roll-in tolerance), and Z-fold (accordion) layouts.
Calculate exact panel widths and ruler guide coordinates for Outside and Inside spreads.
Amount inner tuck panel is narrower
Flat Sheet: 297 × 210 mm
For a tri-fold on a 297 mm wide A4 sheet with a 3 mm roll-in tolerance: the Front Cover and Back Panel each measure 100 mm, while the inner tuck-in panel measures 97 mm (100 + 100 + 97 = 297 mm) so it nests cleanly inside the fold.
Setting up an A4 6-page tri-fold brochure with a standard 3 mm fold-in allowance.
Used whenever laying out 6-page tri-fold brochures, Z-fold maps, menus, and 4-page bi-fold folders in InDesign or Illustrator.
For a 297 × 210 mm A4 tri-fold, the industry-standard panel widths are 100 mm (Front Cover), 100 mm (Back Center), and 97 mm (Inner Tuck Flap). On the Outside spread, place vertical guides at 97 mm and 197 mm; on the Inside spread, place guides at 100 mm and 200 mm.
For an 11 × 8.5 inch landscape tri-fold, the standard panel widths are 3.6875 in (3 11/16") for the Front Cover, 3.6875 in (3 11/16") for the Back Panel, and 3.625 in (3 5/8") for the inner tuck-in panel (3.6875 + 3.6875 + 3.625 = 11.00 inches).
In a Z-fold (accordion), the sheet folds back and forth in alternating directions like stairs, so neither outer panel wraps around the other. In a tri-fold (letter/barrel fold), both outer panels fold in the same direction, meaning the inner flap must tuck inside the outer crease.
Calculate flyer dimensions and bleed for A4, A5, A6, DL, US Letter, Half Letter, and Custom handouts.
Complete A4 dimensions (210 × 297 mm / 8.27 × 11.69 in) and pixel sizes across 72, 96, 150, 300, and 600 DPI.
Display A3 dimensions (297 × 420 mm / 11.69 × 16.54 in) and calculate pixels by DPI and bleed.
Calculate full document dimensions with bleed, total bleed added, trim area, and pixels.
Calculate usable live design area and column widths from page size and Top, Bottom, Left, Right margins.
Explore related mathematical concepts, ISO standards, and prepress calculators.
Panel width geometry for tri-fold (letter fold), Z-fold, and gate-fold brochures with roll-in compensation.
Standard international letterhead and document sheet measuring 210 × 297 mm (8.27 × 11.69 in).
Twice the area of A4, measuring 297 × 420 mm (11.69 × 16.54 in) for posters and spreads.
Artwork extension beyond the trim line (typically 3 mm or 0.125 in) to prevent white edges after cutting.
Top, bottom, outside, and binding gutter margins surrounding the live typography column.
International paper size standard based on the 1:√2 aspect ratio and a 1 m² A0 reference sheet.