Pixel to CM Converter
Convert pixel dimensions to centimeters (cm) using metric-to-DPI conversion math.
When your print specification sheet lists dimensions in centimeters—such as a 50 × 70 cm poster or a 21 × 29.7 cm A4 cover—this calculator computes the exact integer pixel width and height required at your target DPI.
Enter a single value (Width) or both Width and Height for a 2D sheet conversion.
Calculated from 21 × 29.7 cm at 300 DPI
| Resolution Preset | Typical Use Case | Converted Result (px) |
|---|---|---|
| 72 DPI | Legacy Screen / Large Billboard | 595 × 842 px |
| 96 DPI | Standard CSS / Web Reference | 794 × 1,123 px |
| 150 DPI | Large-Format Posters & Banners | 1,240 × 1,754 px |
| 300 DPI | Commercial Offset & Photo Print | 2,480 × 3,508 px |
| 600 DPI | Fine Line Art & High-Res Labels | 4,961 × 7,016 px |
Dividing centimeters by 2.54 converts the length into inches; multiplying by DPI yields the exact number of pixels needed, rounded to the nearest whole pixel.
You are exporting a 50 × 70 cm museum poster at 150 DPI.
Used when setting up raster artwork for metric frames (30×40 cm, 50×70 cm, 70×100 cm), roll-up banners, packaging panels, and European print collateral.
Convert pixel dimensions to centimeters (cm) using metric-to-DPI conversion math.
Calculate exact pixel dimensions from millimeters (mm) at 72, 150, 300, or 600 DPI.
Complete A4 dimensions (210 × 297 mm / 8.27 × 11.69 in) and pixel sizes across 72, 96, 150, 300, and 600 DPI.
Calculate poster dimensions, bleed, and pixel sizes at 150 DPI and 300 DPI for A4–A0, 11×17, 18×24, and 24×36.
Calculate full document dimensions with bleed, total bleed added, trim area, and pixels.
Explore related mathematical concepts, ISO standards, and prepress calculators.
Standard international letterhead and document sheet measuring 210 × 297 mm (8.27 × 11.69 in).
Artwork extension beyond the trim line (typically 3 mm or 0.125 in) to prevent white edges after cutting.
Standard display poster formats including 18 × 24 in, 24 × 36 in, and ISO A2/A1/A0 sheets.
Metric print unit conversion based on the exact international definition 1 inch = 25.4 millimeters.
Conversion of digital pixel counts into physical inches by dividing pixels by target DPI.
Conversion of physical inches into raster pixel dimensions by multiplying inches by DPI.